Rigid (Foam Board) Insulation R-Value: Chart & FAQ | Airflow Academy (2023)

Out of the dozens of options you have for insulation, one of them is foam board insulation, which is also known as rigid board insulation. Foam board comes in three different types with each type having its different qualities and R-value. As far as its popularity is concerned, rigid board is often preferred for its fair insulation and ease of installation. Foam board insulation has around 3.5-5.5 R-value for every inch. However, these numbers may vary according to the variation of the original product being used. Keep on reading if you plan on learning a thing or two about foam board and the R-values of its different forms.

Table of Contents

(Video) Unit 16 and start LL&CR

Types of Foam Board Insulation & R Values

Foam board is commonly available in three variations, namely polystyrene, polyisocyanurate, and polyurethane. Let us have a brief look over their main characteristics, applications, and R-values.

Foam BoardR-Value/inch
Expanded Polystyrene (EPS)4.0
Extruded Polystyrene (XPS)5.0
Polyisocyanurate8.0
Polyurethane6.5

Polystyrene (Expanded and Extruded)

The first one is polystyrene, which is further divided into expanded and extruded foam. Starting with the former, expanded polystyrene falls in the category of the cheapest insulation materials. It’s lightweight and ideal for protecting fragile items. As for its application, expanded polystyrene is not that widely used for insulation due to its short life. However, it resists bacteria and doesn’t cost a leg. Expanded polystyrene has an R-value of around 4.0 for every inch.

Coming to the latter, extruded polystyrene has more of a dense composition as compared to its sibling. Consisting of closed cells, extruded polystyrene is relatively stronger, durable, and more effective at preventing heat loss. Therefore, it’s often preferred for insulation purposes. The best part is that its superior performance does not make too much of a difference in cost. You’ll find this type of rigid foam in both blue and pink colors. Extruded polystyrene can put up an R-value of up to 5 for an inch.

Polyisocyanurate

Polyisocyanurate, also known as polyiso, is another form of foam board insulation that has closed cells. Due to its extraordinary capabilities of insulating heat energy, polyiso is a costly product. As a matter of fact, it is the most expensive and effective form of foam board insulation. An inch of polyiso can deliver an R-value of 7 to 8. Because of its dense structure, polyiso is used mainly for insulating attics where external temperature strikes the hardest.

(Video) What is the best Insulation? (Part 1)

Polyurethane

Lastly, we have polyurethane, a thermal insulation that is capable of barring soundwaves as well. Although it is also a closed-cell insulation, it does not boast as much stiffness as polyiso. However, both share a common trait, which is the presence of low-conductivity gas in their cells. Not only does polyurethane do a great job at thermal insulation, but it is also resistant to water. Polyurethane can be sprayed as well as installed in the form of rigid foam. It’s usually preferred in the form of spray foam because of the foam being able to fill in tight openings. You can expect polyurethane to put up an R-value of up to 6.5 per inch.

Recommended R-value for Foam Board

If you’ve decided to insulate a building with foam board insulation, you’re probably curious about which rating to opt for. Here’s the thing: the recommended R-value for every area is different. The US is subcategorized into climate zones with each zone having its own R-value requirements for homeowners to follow. Below is a table given that shows the required R-value for each climate zone:

Climate ZoneFor AtticFor FloorFor Wooden Wall
1R-30R-13R-13
2R-49R-13R-13
3R-49R-19R-19
4R-60R-30R-19
5R-60R-30R-21
6R-60R-30R-21
7R-60R-38R-21

Comparing Foam Board to Other Insulation Materials

Foam board insulation has its own pros and cons, but how well does it put up in competition with other popular insulation options such as fiberglass, rockwool, and spray foam?

Foam Board vs Fiberglass

In comparison with the mainstream insulation material fiberglass, foam board insulation takes the win in terms of R-value. Foam board in its weakest form EPS gives you an R-value of 4 per inch, whereas fiberglass only gives you barely 2.5. However, fiberglass costs almost half as foam board insulation. So, you’re basically paying more for a denser and more effective material. Fiberglass has the benefit of ease of installation, unlike foam board. As we mentioned previously, foam board requires tight fits since it cannot be molded into place. Fiberglass, on the other hand, is relatively easier to set up but requires extra safety measures.

(Video) U-Value, R-Value, and Radiation

Foam Board vs Rockwool

Rockwool is made from melted minerals and is commonly used for insulating exteriors of structures. 40% of rockwool’s ingredients are recycled, which means its manufacturing holds little to no harmful impact on the planet’s health. Compared to foam board insulation, rockwool brings a variety of benefits to the table. It comes with several praiseworthy qualities such as noise, pest, moisture, and fire resistance. Foam board, on the other hand, shares only a few common traits with rockwool. However, the former is way better for minimizing heat conduction. Rockwool offers an R-value of max 3.3 per inch while rigid foam can go up to 8 at its best.

Further reading: Rock wool/Mineral wool R value

Foam Board vs Spray Foam

Spray foam is usually derived from polyurethane, a type of foam board insulation that we described previously. As the name tells us, spray foam is applied in the form of wet thick foam that expands rapidly upon contact with the surface. It holds outstanding insulating abilities and is ideal for insulating areas where space is a problem. In regards to R-value and opposition to moisture, there’s not much of a difference since both spray foam and foam board fall somewhere in the same bucket. The real difference arises in the application of the material. Spray foam is better at filling gaps because of its texture as compared to rigid board, but it also costs way more.

Effect of Moisture on Foam Board R value

All products of foam board insulation come with special moisture-resisting abilities. For an insulation material, this can do wonders. Foam board insulation is almost completely impermeable. Due to this advantage, it is free from the need for a vapor barrier which is an additional cost. However, this can be said for all forms of foam board insulation except one, expanded polystyrene. EPS’ open-cell formation and spacious assembly of bubbles are not as good at fighting wetness as the rest of foam board’s types. Over time, if EPS faces dampness, it’s probable that it can impact the material’s efficiency and promote the growth of mold. For this reason, the R-value/heat resistance of foam board remains unchanged even if wet.

(Video) TechConnect Webinar: Net and Blow Wall Insulation

Does compression affect R-value?

Compression can become a major issue during the installing process for insulation. In general, you’re not supposed to compress the material because doing so can negatively impact the R-value you’re trying to aim for. Foam board insulation cannot and should not be compressed. Hence, its R-value remains unaffected during the installation process. Since the material has a rigid build, it’s almost impossible to try and push the foam into tight spaces. It is essential to cut the foam for a perfect fit. Otherwise, you’ll just be wasting both money and effort in putting up insulation that can barely preserve the inner heat energy of the house.

Why Do R-values Differ in Foam Board Products?

You’re probably wondering how a single insulation material has different R-values. The answer to this question is quite simple. Since foam board comes in different variations with different compositions, each product has its own effectiveness in preventing heat energy loss. For instance, expanded polystyrene has a lower density and lighter mass. This means it has a lower R-value per inch as compared to other forms of foam board, such as polyurethane. Nonetheless, all of these types count as foam board and bring significant insulation properties to the table.

Where to Use Foam Board Insulation

Deciding whether foam board insulation is right for you or not is an important decision. Foam board insulation is great at combatting moisture. Polyurethane, in particular, holds excellent moisture-resistant qualities that make it one of the best options for insulating areas where moisture would build up or pipe leaks might happen. Crawlspaces, kitchens, and bathrooms are just a few of the places where foam board insulation would fit best. You’re free to insulate other areas such as walls, attics, and floors if needed. Rigid foam board insulation can fit pretty much anywhere. You will have to tape the foam pieces together tightly to reduce heat conduction as much as possible.

How Long Does Foam Board Insulation Last?

What good is an insulation that requires replacement after every couple of years? Foam board insulation is one of the most solid solutions out there that provides a durable barrier against the weather. Its closed-cell forms have a long life due to their high-density composition. Not to mention foam board’s resistance towards moisture, which is one of the key reasons behind insulation going bad before its due time. You can expect the R-value to remain constant as well because rigid board does not deteriorate with time. Therefore, durability is the last thing you need to worry about if you’re opting for foam board insulation.

(Video) F2021 Lesson 4 1 4b Glass Types

Conclusion

Make sure you do your research about which type of foam board product would best suit your needs before buying the material. There’s no denying that it’s one of the best insulation materials in the market, so the high price is somewhat justified. Lastly, you can refer to our table of recommended R-value ratings for different climate zones in the US.

FAQs

What is the R-value of rigid foam board? ›

Extruded polystyrene: Extruded polystyrene (XPS) rigid foam is usually blue or pink in color, with a smooth plastic surface. XPS panels typically aren't faced with other material. The R-value is about R-5.

What is the R-value of 2 inch foam board? ›

Polyisocyanurate (foam is usually yellow or gray)

With an R-value of 13.1 for a 2" thick sheet only two 2" sheets are required to achieve R-25.

How many inches of rigid insulation is R30? ›

Rigid Foam Board Insulation

What is this? To attain a R30 insulation thickness, a rigid foam board insulation must have 7.5 to 8.33 inches depth.

What is the R-value of 1 inch thick STYROFOAM? ›

R Value by Material
Material TypeR ValueCost / sq. ft. per R value
Closed cell polystyrene spray foam (1 inch thick)6.5$0.25
Expanded polystyrene foam board (1 inch thick)3.8-4.4$0.07
Extruded polystyrene foam board (1 inch thick)5$0.10
Polyisocyanurate foam board (1 inch thick)6.5$0.10
3 more rows
23 Apr 2020

Does stacking rigid foam insulation increase R-value? ›

Rigid foam insulation can be stacked on top of each other, like most insulation, to increase the R-value.

What is the difference between pink and blue foam board? ›

Both are manufactured using the same process and contain similar chemical components. The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company.

What is the difference between Type 1 and Type 2 insulation? ›

Type 1 polystyrene insulation has a typical thermal resistance value or R3. 7/in., while Type 2 polystyrene insulation has a minimum thermal resistance value of R4. 0/in.

Do you need a vapor barrier with rigid foam insulation? ›

Foam insulation usually does not require a vapor barrier. For some foam insulation types, such as closed-cell spray foam and foam board insulation, the insulation itself stops the movement of most water vapor.

What is the R-value of 3 inch foam board? ›

This product typically has an R value of 3.6 to 4.0 per inch of thickness.

What is the thinnest insulation with the highest R-value? ›

Aerogel insulation offers the highest R-value of any insulating material at less weight and thickness—ideal for construction, refineries, pipelines, and thin-gap thermal barriers.

How thick is R25 rigid insulation? ›

Develop a 2-inch thick composite foam insulation board with R25 (hr-ft2-F/Btu), with a cost premium of $0.30/ft2. This addresses the MYPP goal of creating low-cost, advanced insulation materials.

What insulation is best for attics? ›

If you check with the North American Insulation Manufacturers Association, they'll assure you that fiberglass or mineral wool is definitely your best choice for attic insulation.

How thick should foam board insulation be? ›

Most panels range between 3/8″ and 2.5″ in thickness, though other dimensions and thicknesses are usually available through custom order.

What is the R-value of styrofoam vs fiberglass? ›

Closed-cell spray foam has an R-value of roughly 6.5 per inch while open-cell spray foam has an R-value of 3.5 per inch. The R-value of fiberglass is significantly lower at around 2.2 per inch. In addition, fiberglass insulation loses R-value over time while spray foam insulation maintains its effectiveness.

Which board is best for insulation? ›

Polyurethane (PUR) is one of the most efficient insulation materials on the market. PUR is available in the shape of insulation boards or foam. However, the boards have a better insulation value than the foam variant. Moreover, these boards guarantee a certain thickness in advance and nothing has to be taped over.

Does foam board insulation need an A gap? ›

Tip of the Week: Do You Need a Gap Between Insulation Panels?

Does rigid insulation lose R-value over time? ›

As these rigid foam products age, their R-value decreases

Unfortunately, these useful blowing agents gradually dissipate.

Can you use rigid foam insulation between studs? ›

Even with its flaws—namely, its inability to perfectly mold to the bays between the studs—rigid foam insulation will be a better bet than no insulation. Using low-expanding spray foam sealant to seal those gaps further increases rigid foam's insulating properties between studs.

Is foam board a good insulator? ›

Foam board insulation provides good thermal resistance and reduce heat conduction through structural elements, such as wood and steel studs, according to the U.S. DOE.

How thick should foam board insulation be? ›

Most panels range between 3/8″ and 2.5″ in thickness, though other dimensions and thicknesses are usually available through custom order.

Do you need a vapor barrier with rigid foam insulation? ›

Foam insulation usually does not require a vapor barrier. For some foam insulation types, such as closed-cell spray foam and foam board insulation, the insulation itself stops the movement of most water vapor.

Is rigid foam insulation waterproof? ›

Is Rigid Foam Board Waterproof? Technically, EPS and XPS rigid foam board insulation are considered to be water-resistant. A product branded as waterproof means that it offers complete impermeability, even if permanently immersed in water.

Videos

1. Insulation & Energy Efficiency Sustainable House Day 2021 Expert Session
(Renew)
2. Product Showcase | UNDERSTANDING STONE WOOL SOLUTIONS
(New York Passive House)
3. Product Showcase | More than an R value Accustics in commercial buildings
(New York Passive House)
4. Insulation 100 and Myths Surrounding Radiant Barrier
(HomeProjeXX )
5. Do It Yourself At home insulation
(Community Energy Project)
6. Insulation Intel® Webinar: Johns Manville’s Building Insulation Products
(Johns Manville Building Insulation)
Top Articles
Latest Posts
Article information

Author: Gov. Deandrea McKenzie

Last Updated: 12/01/2022

Views: 5648

Rating: 4.6 / 5 (66 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Gov. Deandrea McKenzie

Birthday: 2001-01-17

Address: Suite 769 2454 Marsha Coves, Debbieton, MS 95002

Phone: +813077629322

Job: Real-Estate Executive

Hobby: Archery, Metal detecting, Kitesurfing, Genealogy, Kitesurfing, Calligraphy, Roller skating

Introduction: My name is Gov. Deandrea McKenzie, I am a spotless, clean, glamorous, sparkling, adventurous, nice, brainy person who loves writing and wants to share my knowledge and understanding with you.